The new TG12000 is a generic RF Tracking Generator that can be used with many existing Spectrum Analyzers. It covers a range from DC to 12GHz in three bands via two front SMA outputs. It also functions as a standalone RF signal generator from 25 to 6000MHz.

The TG12000 can replace the Agilent HP 85640A external tracking generator and adds a Signal Generator function as well. In addition it covers the 2nd and 3rd band, which the 85640A does not, providing a TG signal to 12GHz. A very good troubleshooting and measuring tool to easily characterize filters and attenuators!

Note: The TG12000 is considered a specialty product and can take a few extra days to ship.

Tracking Signal Generator Specifications:

• Tracking signal bands: LF – 2.5GHz,  2.0 – 5.8GHz,  5.8 – 12 GHz
• Internal signal generator:  25-6000 MHz
• Typical TG output power:  -5.0 dBm typical
• Signal generator power: +10 dBm typical
• Compact dimensions: 2.75″ x 4.15″ x 1.15″

TG12000 Features:

• 18GHz microwave SMA connectors
• Rear MCX 10MHz reference frequency input
• Fully USB-powered
• Sturdy all-aluminium enclosure
• Industry standard SCPI command support
• Status and power LEDs / audio feedback
• USB virtual COM port control from included PC control application

Tracking Signal Generator Support:

• TG6000-control (NEW! Sept 2018) (Firmware update might be required)
• TG6000_DatasheetR7_V1 (TG12000 – 2017)
• Tracking Generator FAQ
• Tracking Generator Theory and Operation Article
• Rear Switch Setting Table
• Example Tracking Level Calibration and Usage Video

Band 3 Tracking Signal to 12GHz (HP8566B):

Currently  Supported  Spectrum  Analyzers for TG12000:

• HP 8566A/B
• HP 8568A/B
• HP 8569A/B
• HP 8560 all versions
• HP 8561 all versions
• HP 8562 all versions
• HP 8563 all versions
• HP 8564 all versions
• HP 8590*
• HP 8591*
• HP 8592*
• HP 8593*
• HP 8594*
• HP 8595*
• HP 8596*
• Advantest R3463
• Advantest R3465

*Units without LO output option must be modified with a simple directional coupler. This should effect the internal LO by around 1.0dB. We recommend the ZADC-10-63+ inserted after the last power amp.

Product Media:

Featured on Microwaves & RF, RF Cafe, Military&Aerospace Electronics, MPD, High Frequency Electronics!